|
Single Phase Generator
Features:
- Designed for the operation of the double focus X-ray tube. - Automatic line voltage compensation. - Tube protection circuit. - Available in radiographic/fluoroscopic versions. - Compact high voltage transformer fits under any Raymax radiographic table. - SCR contacting: Zero voltage switched with core memory to prevent high tension saturation. - Internal power supplies for external devices (i.e. collimators, locks, etc.) - Mid secondary type mA circuit protections. - Digital mAS & KV Display - Constant voltage filament stabilizer. - 50 Hz - 60 Hz
Generator Specifications: - KVP 1 KV steps, 40 to 125 KVP
- Milliamp Five position switch; 60S, 120S, 240L, 300L, 360L @60 Hz. (Model; 2136) 50S, 100S, 150L, 200L, 300L @50 Hz. (Model; 2130, 2136)
- Timer Digital 23 position solid state, 1/120 (1 pulse) to 2 seconds with 60 Hz. Line. Digital 23 position solid state, 1/100 (1 pulse) to 5 seconds with 50 Hz. Line.
Contactors SCRs with zero start & stop using electromagnetic contactor as back up.
Tube Safety Built in calibrateable circuit to protect against Tube overload (KV, mA & Time)
Circuit Breaker Mid-secondary breaker standard.
X-Ray Tube Filament Constant voltage stabilizer working into a temperature compensated calibrating network.
H.T. Tank Single tube, full wave, silicon rectifiers (Model; 2125)
Power Requirements:
Power Requirement 200 to 250 Volt single phase line rated at 100 amps with a regulation of at least 2%. Maximum line current is 140 amps @ 230 Volts. Maximum line resistance to enable compliance at full load is 0.15 Ohms. Duty cycle is 1% or 300 mA @ 125 KVP every 10 minutesr frequency for reduced radiation exposure.
Brochure
|
 |
